
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X75B is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 75mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X75B is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It delivers 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, extending to 5497.8 N push at 0.7 MPa. The short C-clip and riveted body design significantly reduces mounting depth compared to round-body alternatives, making it ideal for heavy-duty machinery where space is restricted.
This specific configuration includes a male-thread piston rod end (M26x1.5) for direct load coupling, paired with a robust Ø32 mm rod and a PT3/8 port. The hard-anodized bore uses a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable cushion. While the body features magnetic-switch grooves, this unit ships without the internal magnet, so position sensing requires adding the -S option or external sensors.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X75B |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 3927 N push force required to eject dense plastic parts from injection molds, utilizing the male M26x1.5 thread for a secure ejector rod linkage.
Handles robust feed positioning of thick metal blanks into large stamping presses, where the short compact body minimizes axial machine interference.
Drives heavy mechanical flaps on high-speed palletizing lines, relying on the fixed NBR bumper to absorb the 30-500 mm/s cycling energy without external cushions.
When sizing this 100 mm bore model, stepping down to an 80 mm bore yields 2513.2 N push at 0.5 MPa, whereas stepping up to a 125 mm bore provides 6135.9 N. The 75 mm stroke fits well within the 100 mm maximum standard stroke for this bore, offering substantial travel without entering made-to-order long-stroke territory. Remember that a plain ACQ body does not hold its load if air pressure drops or the valve is centred; the rod will drift. For fail-safe vertical holding, specify an external rod lock or a pilot-operated check valve. To order, confirm the 100 mm bore, 75 mm stroke, PT3/8 port, male M26x1.5 rod thread, and no magnet.
AirtacDistr lists every ACQ100 order code with its price on one page at https://airtacdistr.com/products/airtac-acq100-compact-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3524.8 N. At 0.7 MPa, the push force is 5497.8 N. The maximum push force is 801 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the speed range is 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to decelerate the piston near stroke end, which is not field-adjustable; for high energy loads you should slow the approach or add an external shock absorber. Additionally, it has no position lock, so the rod drifts if air is lost—use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.