
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X75ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 75mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X75ST is a double-acting, single-rod JIS compact cylinder engineered for substantial thrust in a minimal axial footprint. It delivers 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, peaking at an 801 kgf maximum push at 1.0 MPa. The integrated C-clip and riveted piston-to-rod design significantly reduce overall length compared to round-body units, saving valuable machine mounting depth.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The -S code indicates a built-in piston magnet for non-contact position sensing using AirTAC reed or electronic switches fitted into the body's peripheral grooves. Stopping energy is managed by fixed NBR elastomer bumpers at both ends, which are not field-adjustable.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X75ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust linear motion to extract heavy automotive interior panels from injection molds, utilizing the 3927 N push force to overcome ejection resistance.
Drives a heavy-duty stamping die set in a mechanical press line, where the short C-clip body saves axial depth and the fixed NBR bumper absorbs end-stop impact.
Indexes empty wooden pallets into an automated packaging conveyor line, relying on the 32mm rod and M20x2.5 female thread to securely drive the load.
Selecting the ACQ100X75ST provides 3927 N of push force at 0.5 MPa. If you need less thrust, the adjacent Ø80 bore yields 2513.2 N of push at 0.5 MPa. For even higher force requirements, the Ø125 big-bore variant offers 6135.9 N of push at 0.5 MPa. This 75mm stroke is well within the 100mm maximum standard stroke for this bore.
Remember that a plain compact cylinder does not hold its position or load when air is lost or the valve is centered; the rod drifts, and the fixed NBR bumper only decelerates it near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required. When ordering, confirm the 100mm bore, 75mm stroke, NPT3/8 port, the -S magnet option, and the default female M20x2.5 rod thread.
Quick checklist
This double-acting 100mm bore cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at both ends to absorb end-stop energy; these are not adjustable air cushions, so for high-speed approaches you should add external shock absorbers. The -S magnet allows non-contact sensing via AirTAC reed or electronic switches fitted into the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.