
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X75T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 75mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X75T is a double-acting JIS compact cylinder engineered to deliver massive force in a minimal axial footprint. It provides a substantial 3927 N push and 3524.8 N pull force at 0.5 MPa, utilizing a hard-anodized 100mm bore and a 32mm piston rod. The riveted C-clip body design significantly reduces overall length compared to standard round-body units, saving valuable machine depth.
This 75mm stroke model features a NPT3/8 port and a default female M20x2.5 rod-end thread for secure load coupling. Deceleration is handled by fixed NBR elastomer bumpers at both ends rather than adjustable air cushions, meaning external shock absorbers are recommended for high-energy end stops. While it ships without a sensor magnet, the body retains full magnetic-switch groove compatibility for easy position tracking. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X75T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the heavy 3927 N thrust needed to secure large injection mold halves within compact machine frames, ensuring precise parting line alignment.
Drives the bottom ejector pins in a 200-ton hydraulic press, using the 75mm stroke to clear finished metal components safely and rapidly.
Lifts heavy steel body panels between die stations in an automotive transfer line, utilizing the 32mm rod to handle high dynamic side loads.
When sizing this 100mm bore model, compare its 3927 N push at 0.5 MPa against the smaller 80mm bore, which yields 2513.2 N. If your application requires even greater thrust, the larger 125mm bore variant provides 6135.9 N. Remember that a plain ACQ cylinder does not hold its position or load when air pressure is lost or the valve is centered; the piston will drift and the fixed bumper only decelerates it near the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order this specific unit, confirm the 100mm bore, 75mm stroke, NPT3/8 port, female rod thread, and no magnet.
Quick checklist
This double-acting cylinder generates 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa, with a speed range of 30-500 mm/s and a temperature range of -20 to +70 C.
No, it uses fixed NBR elastomer bumpers at each end rather than an adjustable air cushion, so external shock absorbers should be added for high-speed impacts. Additionally, this specific configuration ships without a sensor magnet, though the body retains grooves for adding reed or electronic switches if needed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.