
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X80B is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 80mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X80B is a double-acting JIS compact cylinder engineered to deliver 3927 N of push force at 0.5 MPa and 5497.8 N at 0.7 MPa. Its short C-clip and riveted body architecture significantly reduces axial mounting depth compared to conventional round-body units, saving valuable machine footprint in tight assemblies.
This specific configuration includes a male-thread piston rod end (M26x1.5) for direct load coupling, a 32mm rod diameter, and PT3/8 ports. Deceleration is handled by a fixed NBR elastomer bumper at each end rather than an adjustable cushion, so high-energy cycles may require external shock absorption.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X80B |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 5497.8 N of extend force at 0.7 MPa to secure heavy injection mold halve-joints during machine tooling changeovers.
Ejects dense stamped metal parts from hydraulic press beds using the 3524.8 N retract force at 0.5 MPa over an 80mm stroke.
Actuates heavy-duty robotic welding clamps on chassis subframes, utilizing the 32mm male rod end for rigid mounting.
When sizing this 100mm bore model, consider stepping down to the 80mm bore for lighter loads, which yields 2513.2 N push at 0.5 MPa, or stepping up to the 125mm big-bore variant for heavier demands, providing 6135.9 N push. The ACQ100X80B ships without a position-sensing magnet, though the body retains sensor grooves for future additions.
Ensure your ordering essentials match this spec: 100mm bore, 80mm stroke, PT3/8 port, no magnet, and a male M26x1.5 rod thread. Note that a plain compact cylinder drifts when air pressure is lost or the valve is centered; the fixed bumper only decelerates the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
AirtacDistr lists every ACQ100 order code with its price on one page at https://airtacdistr.com/products/airtac-acq100-compact-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3524.8 N. At 0.7 MPa, the push force is 5497.8 N. The maximum push force is 801 kgf at 1.0 MPa operating pressure.
No, it uses a fixed NBR elastomer bumper at each end to absorb the end stop. It is not a field-adjustable air cushion, so for high-speed or high-energy cycles, you should slow the approach or add an external shock absorber.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.