
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X80ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 80mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X80ST is a double-acting JIS compact cylinder engineered to deliver substantial force within a minimal axial footprint. Utilizing a C-clip and riveted piston-to-rod assembly, the short body design significantly reduces mounting depth compared to conventional round-body units. At 100 mm bore, it generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, making it suitable for heavy-duty positioning tasks.
This 80 mm stroke model includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches, fitting neatly into the magnetic grooves molded around the body. Deceleration is handled by a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. Operating at speeds of 30-500 mm/s, it features a 32 mm piston rod and a NPT3/8 port to support high flow requirements. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X80ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 3927 N push force required to knock out heavy plastic or aluminum cast parts from injection molds within tight machine envelopes.
Applies steady mid-stroke holding power for light metal bending operations where an 80 mm travel distance and a 32 mm rod resist deflection.
Acts as a heavy-duty stopper block on high-throughput packaging lines, using the NBR bumper to absorb the kinetic energy of incoming pallet loads.
Selecting this 100 mm bore involves confirming the 80 mm stroke, NPT3/8 porting, and the -S magnet option for position sensing. If your application requires less force, stepping down to the 80 mm bore yields 2513.2 N of push at 0.5 MPa. Conversely, moving up to the 125 mm big-bore variant increases that output to 6135.9 N. Keep in mind that a plain compact cylinder like this drifts when air pressure is lost or the valve is centered; the fixed NBR bumper only decelerates the stroke near the end points and does not function as a locking brake. For fail-safe load holding, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This 100 mm bore double-acting cylinder generates a push force of 3927 N and a pull force of 3524.8 N at 0.5 MPa. At 0.7 MPa, the push force is 5497.8 N. The maximum push force is 801 kgf at the 1.0 MPa operating pressure limit.
It relies on a fixed NBR elastomer bumper at each end to absorb impact, which is not an adjustable air cushion, so high-speed applications may require external shock absorbers. The built-in magnet (-S) allows you to mount AirTAC reed or electronic switches directly into the body grooves for precise end-position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.