
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X90BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 90mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X90BT is a double-acting JIS compact air cylinder engineered to deliver massive thrust in a minimal axial footprint. It produces 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, peaking at 801 kgf max push at 1.0 MPa. The integrated C-clip and riveted piston-to-rod assembly eliminate bulky tie-rods, saving valuable machine depth where a standard round-body cylinder cannot fit.
This specific configuration includes a male-thread piston rod end (M26x1.5) for secure mechanical coupling to your tooling. The 32 mm rod is driven through a hard-anodized aluminum bore via a NPT3/8 port. Deceleration at stroke ends relies on fixed NBR elastomer bumpers rather than adjustable pneumatic cushions, so high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X90BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 5497.8 N extension force at 0.7 MPa needed to knock out heavy automotive plastic bumpers from steel molds.
Drives a 90 mm stroke blanking die to form thick gauge sheet metal housings in an automated fabrication cell.
Crushes and squares corrugated cardboard sheets against a hard stop before they enter the case erector.
When sizing this 100 mm bore unit, evaluate stepping down to the ACQ80 bore for 2513.2 N push at 0.5 MPa, or stepping up to the ACQ125 big-bore variant for 6135.9 N push at 0.5 MPa. Remember that a plain compact cylinder drifts when air pressure is lost or the directional valve centers; the fixed NBR bumper decelerates the end stop but provides no locking function. For fail-safe vertical load holding, you must add an external rod lock or a pilot-operated check valve. To order this exact unit, specify the 100 mm bore, 90 mm stroke, NPT3/8 port, male M26x1.5 rod thread, and no sensor magnet.
Quick checklist
The ACQ100X90BT has a 100 mm bore and a NPT3/8 port. It generates 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa.
It uses fixed NBR elastomer bumpers at each end to absorb impact, not an adjustable air cushion. It does not hold a load if air pressure drops; the piston will drift, so an external rod lock is required for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.