
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X90SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 90mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X90SBT is a double-acting JIS compact cylinder engineered for substantial force in tight axial spaces. It delivers a robust 3927 N push force at 0.5 MPa, extending to 5497.8 N at 0.7 MPa, while utilizing a short C-clip and riveted body architecture that drastically reduces mounting depth compared to round-body alternatives. This 100mm bore unit includes a built-in piston magnet for position sensing and a male M26x1.5 threaded rod end for direct load coupling.
Deceleration is handled by a fixed NBR elastomer bumper at each end of the stroke. This is not an adjustable air cushion, so for high kinetic energy loads approaching the 500 mm/s speed ceiling, adding an external shock absorber is recommended. The hard-anodized inner wall ensures long service life, and the sensor grooves around the body accept AirTAC reed or electronic switches. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X90SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides auxiliary clamping force on large injection molding machines, utilizing the 3927 N extend thrust to secure heavy tooling backplates during operation.
Ejects formed metal blanks from 400-ton mechanical presses, relying on the 3524.8 N retract force and the 90mm stroke to clear the die area rapidly.
Actuates a heavy-duty diversion arm on high-capacity roller conveyors, pushing loaded pallets weighing up to 500 kg onto branch routing lanes.
When sizing this 100mm bore actuator, evaluate your force requirements carefully. Stepping down to an 80mm bore yields 2513.2 N push at 0.5 MPa, whereas this ACQ100X90SBT provides 3927 N. If your application demands even higher thrust, note that the 100mm sits at the top of the standard long-stroke family before transitioning to the 125mm big-bore tier. Remember that a standard ACQ body does not hold its position if air pressure drops or the valve is centred; the rod will drift. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
To finalize your order, confirm these exact specifications: 100mm bore, 90mm stroke, NPT3/8 porting, a built-in magnet for sensing (S), and the male M26x1.5 rod thread (B). Ensure your side-load limits are calculated for this compact rod to prevent premature seal wear.
Quick checklist
This double-acting cylinder generates 3927 N push and 3524.8 N pull at 0.5 MPa, and 5497.8 N push at 0.7 MPa. The maximum push force is 801 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s and an operating temperature of -20 to +70 C.
No, the ACQ100X90SBT uses a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. It is designed to absorb the end stop, not act as a brake. For high kinetic energy loads, you should slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.