
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X100BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X100BT is a double-acting JIS compact air cylinder engineered for space-constrained machinery, yielding 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body architecture drastically reduces axial mounting depth compared to conventional round-body units.
This specific configuration ships with a male M14x1.5 thread on the Ø16 mm piston rod for direct load coupling, alongside a NPT1/8 port. End-of-stroke energy is managed by fixed NBR elastomer bumpers rather than adjustable cushions, meaning high-velocity cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X100BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates diverter arms on 24V DC conveyor rollers to redirect small goods between packaging lanes using its 100 mm stroke.
Slides heavy sliding safety doors open and closed on machining centers, utilizing the male M14x1.5 thread for a rigid rod coupling.
Folds major flaps on corrugated cardboard cartons during automated erecting processes where short body depth prevents frame interference.
Stepping down to the Ø25 bore provides 245.4 N of push force at 0.5 MPa, whereas scaling up to the Ø40 bore increases that output to 628.3 N, allowing precise matching to your 32 mm requirement. Keep in mind that this standard double-acting design will drift and lose its position if air pressure drops or the valve centers; the fixed bumper only decelerates the piston near stroke end and does not function as a lock. For fail-safe load holding, integrate an external rod lock or a pilot-operated check valve.
When ordering, verify the 32 mm bore, 100 mm stroke, NPT1/8 porting, and the male M14x1.5 rod thread to ensure proper integration.
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force reaches 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
This model uses fixed NBR elastomer bumpers at both ends, which are not adjustable; for high-energy cycles, add an external shock absorber. It lacks a built-in magnet, so while the body features sensor grooves, you must select a model with the -S option to utilize AirTAC reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.