
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X100FBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X100FBT is a double-acting JIS compact cylinder engineered for space-constrained machinery, offering 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduces overall axial length compared to conventional round-body units, saving valuable mounting depth. This specific configuration ships with an FB mounting bracket for secure front-face installation and a standard 100 mm stroke, representing the maximum standard stroke length for this 32 mm bore size.
This model utilizes a 16 mm piston rod with a female M8x1.25 thread end for straightforward load coupling. Deceleration at the stroke extremes is handled by fixed NBR elastomer bumpers rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorbers or a slowed approach speed. The hard-anodized aluminum bore ensures durability, and while the body features integrated magnetic-switch grooves, this particular SKU omits the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X100FBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives sorting pop-up arms on logistics conveyors to redirect cartons at high throughput speeds within tight transfer zones.
Actuates tooling release mechanisms on machining centers, where the short axial profile preserves valuable spindle envelope space.
Operates the sealing jaw stroke on vertical form-fill-seal equipment, providing consistent 402.1 N of extension force for bag sealing.
When sizing your pneumatics, compare this 32 mm bore (402.1 N push @0.5 MPa) against the adjacent options: stepping down to a 25 mm bore yields 245.4 N of thrust, while moving up to a 40 mm bore provides 628.3 N. If your mechanism must maintain its position during a loss of air supply or when the directional valve centers, note that this cylinder will drift; the fixed bumper only softens the end-stop impact and does not function as a locking device. For fail-safe holding, implement an external rod lock or a pilot-operated check valve.
To finalize your build, verify these ordering essentials: 32 mm bore, 100 mm stroke, NPT1/8 port, female M8x1.25 rod thread, the front FB mounting bracket, and no sensor magnet.
Quick checklist
This 32 mm bore double-acting cylinder provides 402.1 N of push and 301.6 N of pull at 0.5 MPa, 562.9 N of push at 0.7 MPa, and a maximum push force of 82 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and supports a speed range of 30-500 mm/s.
It relies on fixed NBR elastomer bumpers at each end to absorb shock, which are not field-adjustable like an air cushion; for high-energy cycles, slow the approach or add external shock absorbers. Additionally, it cannot hold a load on its own if air pressure is lost or the valve is centered, so an external rod lock or pilot-operated check valve is required for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.