
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X100SBCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X100SBCBT is a double-acting JIS compact cylinder engineered for space-constrained machinery, delivering 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces axial mounting depth compared to standard round-body units, making it ideal for tight machine footprints. The bore is hard-anodized for longevity, and it operates at speeds between 30 and 500 mm/s.
This specific configuration includes a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic solid-state switches, a male M14x1.5 threaded rod end (-B) for direct load coupling, and a CB mounting bracket. Deceleration at stroke ends relies on fixed NBR elastomer bumpers rather than an adjustable air cushion, so high-energy cycles may require external shock absorbers to prevent end-cap damage. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X100SBCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 402.1 N of extend force needed to push empty pallets out of a stacking magazine at the end of a packaging line.
Utilizes the 100 mm stroke and male M14x1.5 thread to directly link and slide the safety enclosure door on a turning center.
Deploys the CB bracket to securely mount underneath a carton erector, using the fixed NBR bumper to gently fold cardboard flaps.
When sizing this 32 mm bore, stepping down to a 25 mm bore reduces the push force to 245.4 N at 0.5 MPa, while stepping up to a 40 mm bore increases it to 628.3 N. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Ensure your ordering details match the male M14x1.5 thread, CB bracket interface, and the required magnetic sensor groove.
Note that a plain compact cylinder like this does not inherently hold its position if air pressure is lost or the directional valve is centered; the rod will drift. If your application requires fail-safe load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve into the system.
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. The 100 mm stroke specified here is the maximum standard stroke available for a 32 mm bore.
No, the ACQ32X100SBCBT uses a fixed NBR elastomer bumper at each end of the stroke to absorb impact. It is not a field-adjustable air cushion. If your cycle speed or moving mass generates high kinetic energy, you should slow the approach speed or add an external shock absorber to protect the cylinder body.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.