
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X100SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X100SBT is a double-acting JIS compact cylinder engineered for space-constrained pneumatics, delivering 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body construction drastically reduces axial mounting depth compared to conventional round-body units. This specific configuration includes a built-in piston magnet for position sensing and a male M14x1.5 thread on the Ø16 mm piston rod for direct load coupling.
Instead of an adjustable air cushion, the body relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. This unit operates at speeds between 30 and 500 mm/s, handling a maximum push load of 82 kgf at 1.0 MPa. The integrated sensor grooves around the cylinder body accept AirTAC reed or electronic switches, providing flexible mounting for automation feedback. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X100SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives a sorting flap on a logistics conveyor to redirect parcels weighing up to 40 kg, utilizing the 100 mm stroke to clear the belt path.
Pushes raw steel workpieces into the spindle collet, using the male M14x1.5 rod end for a secure pusher attachment and the magnet for stroke confirmation.
Applies downward pressure to fold carton flaps prior to tape application, where the compact body height saves vertical clearance on the machine arch.
When sizing this 32 mm bore model, consider stepping down to the 25 mm bore if your application requires less force, as it provides 245.4 N of push at 0.5 MPa. If your process demands more power, the 40 mm bore offers 628.3 N of push at 0.5 MPa. Remember that a standard ACQ cylinder does not hold its position if air pressure drops or the valve is centered; the piston will drift. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
To order this exact configuration, confirm the 32 mm bore, 100 mm stroke, NPT1/8 port size, the S option for the piston magnet, and the B option for the male M14x1.5 rod thread. Because the fixed NBR bumper cannot be adjusted in the field, high-speed applications may require an external shock absorber to prevent premature wear.
Quick checklist
This 32 mm bore double-acting cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa, speeds of 30-500 mm/s, and temperatures from -20 to +70 C.
No, it uses a fixed NBR elastomer bumper at each end, which is not an adjustable air cushion. Additionally, it does not hold its load if air is lost; the piston drifts. For high-energy stops, add an external shock absorber, and for position holding, use an external rod lock.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.