
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X100SFBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X100SFBT is a double-acting JIS compact cylinder engineered around a short C-clip and riveted piston-to-rod assembly. This thin profile drastically reduces axial mounting depth compared to conventional round-body units, freeing up valuable machine footprint space. Operating at 100 mm of stroke, it hits the maximum standard stroke limit for the Ø32 bore class before requiring a long-stroke variant.
Delivering 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, this model is equipped with a built-in piston magnet (-S) for AirTAC reed or electronic solid-state switches. The FB mounting bracket provides a fixed foot interface, while the male M14x1.5 piston rod thread (-B) ensures a robust mechanical coupling to your load. It uses a fixed NBR elastomer bumper at the end caps to absorb impact rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X100SFBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Pushes light-to-medium parcels on a logistics conveyor line using its 402.1 N extend force, with the FB bracket anchoring the diverter arm against side inertia.
Cycles a sliding machine enclosure open and closed across the 100 mm stroke, utilizing the male M14x1.5 rod thread for a rigid actuator linkage.
Folds corrugated cardboard flaps prior to sealing on a packaging line, where the integrated magnet triggers a reed or solid-state switch to confirm the fold cycle.
When sizing this 32 mm bore actuator, compare its 402.1 N push force at 0.5 MPa against adjacent bores. Stepping down, the Ø25 yields 245.4 N; stepping up, the Ø40 provides 628.3 N. This ACQ32X100SFBT configuration specifies a 100 mm stroke, an S magnet for position sensing, a male M14x1.5 rod end, and an FB foot bracket. Keep in mind that a standard compact cylinder will drift and fail to hold its position if air pressure drops or the directional valve is centered. The fixed NBR bumper only decelerates the piston near stroke end rather than locking the load, so an external rod lock or pilot-operated check valve is necessary for fail-safe holding.
Quick checklist
At 0.5 MPa, this 32 mm bore double-acting cylinder generates 402.1 N of push (extend) force and 301.6 N of pull (retract) force. At 0.7 MPa, the push force reaches 562.9 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, and the operational speed spans 30-500 mm/s.
Instead of an adjustable air cushion, it relies on a fixed NBR elastomer bumper at each end to absorb the stop. For high-speed or high-energy cycles, you should add an external shock absorber or slow down the approach. Position sensing is enabled via the built-in S magnet, which works seamlessly with AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.