
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X100ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X100ST is a double-acting JIS compact cylinder engineered for space-constrained machinery. By utilizing a C-clip and riveted piston-to-rod connection, the short body design significantly reduces axial mounting depth compared to standard round-body units. At 0.5 MPa, this 32 mm bore generates 402.1 N of push force and 301.6 N of pull force.
This specific configuration includes a built-in piston magnet (-S) for position sensing with AirTAC reed or electronic switches fitted into the body grooves. It features a 100 mm stroke, a NPT1/8 port, and a 16 mm rod with a female M8x1.25 end thread. End-of-stroke deceleration is handled by fixed NBR elastomer bumpers rather than adjustable cushions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X100ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives diverter arms on box conveyor lines where the 100 mm stroke provides adequate reach to redirect parcels between sorting lanes.
Operates sliding safety doors on CNC lathes, utilizing the compact footprint to fit within tight machine enclosures while providing 402.1 N of push force.
Actuates sealing jaws on carton erecting equipment, with the built-in magnet triggering reed or electronic switches to confirm jaw closure.
Stepping down, the 25 mm bore provides 245.4 N push at 0.5 MPa, while stepping up to the 40 mm bore yields 628.3 N push at 0.5 MPa, allowing you to scale force precisely. When ordering, confirm the 32 mm bore, 100 mm stroke, NPT1/8 port, female rod thread, and the integrated magnet. Note that a plain ACQ does not hold its load if air pressure drops or the valve is centered; the piston will drift. For fail-safe position holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
This double-acting cylinder delivers 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s.
No, the ACQ32X100ST uses fixed NBR elastomer bumpers at each end to absorb end-stop impact. It is not an adjustable air cushion. For high-speed or high-energy loads, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.