
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X100T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X100T is a double-acting JIS compact cylinder engineered for space-constrained pneumatic setups. Utilizing a riveted piston-to-rod joint and a C-clip retained body, it achieves a remarkably short axial footprint compared to traditional round-body options. At 32 mm bore, it generates 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, making it well-suited for moderate-duty industrial positioning.
This specific model features a 100 mm stroke, representing the maximum standard stroke length available for this bore size before transitioning into made-to-order long-stroke variants. Deceleration is handled by fixed NBR elastomer bumpers at both end caps, which absorb impact energy but are not field-adjustable like a pneumatic cushion. The barrel incorporates integrated magnetic-switch grooves, though this particular unit ships without the internal magnet; the piston rod measures 16 mm and utilizes a default female M8x1.25 thread for load coupling. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X100T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates a routing flap on a logistics sorting line, utilizing the full 100 mm stroke to redirect parcels efficiently into secondary chutes.
Drives a secondary ejector pin plate in a plastics molding facility, where the compact C-clip body minimizes interference with the mold base.
Folds the minor flaps of corrugated cartons on a continuous packaging conveyor, relying on the 402.1 N push force to overcome board stiffness.
Selecting the ACQ32X100T involves confirming your stroke requirement of 100 mm alongside the 32 mm bore, NPT1/8 port, and female M8x1.25 rod end. If you need to scale your force output, stepping down to the 25 mm bore yields 245.4 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628.3 N push at 0.5 MPa, giving you clear boundaries for adjusting your design parameters.
Keep in mind that this cylinder operates within a 30-500 mm/s speed range and relies on its fixed NBR bumpers for end-stop absorption. Because a standard double-acting cylinder of this type does not inherently hold its position if air pressure is lost or the directional valve is centered, you should incorporate an external pilot-operated check valve or mechanical rod lock if your application demands fail-safe load holding.
Quick checklist
At 0.5 MPa, the 32 mm bore provides 402.1 N of push force and 301.6 N of pull force. At 0.7 MPa, the push force increases to 562.9 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, and the operational speed spans 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at the stroke ends rather than adjustable air cushions, so high-speed applications may require external shock absorbers. Additionally, it does not hold its load if air pressure drops; the piston will drift, requiring an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.