
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X10BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 10mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X10BT is a double-acting JIS compact cylinder engineered for tight axial spaces. A short C-clip and riveted piston-to-rod assembly shrinks the overall body footprint compared to round-body alternatives, yielding 402.1 N of push force at 0.5 MPa. The 32 mm bore features a hard-anodized inner wall and a fixed NBR elastomer bumper at each end to absorb end-stop impact.
This specific configuration includes a male M14x1.5 thread on the 16 mm piston rod for direct load coupling. While it lacks a built-in magnet, the outer body retains magnetic-switch grooves for future sensing upgrades. Operating pressure spans 0.15-1.0 MPa, and the NPT1/8 port ensures robust pneumatic supply delivery. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X10BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extension force to secure aluminum workpieces against a CNC machining tombstone using the male M14x1.5 rod end.
Actuates a short-stroke routing flap on a logistics conveyor, utilizing the compact C-clip body to fit within a 10 mm stroke envelope.
Drives a hot-melt adhesive applicator jaw on a packaging line, relying on the NBR bumper to soften the impact at the 10 mm stroke end.
This 32 mm bore generates 402.1 N push at 0.5 MPa. If you need less force, step down to the 25 mm bore offering 245.4 N push; for heavier loads, step up to the 40 mm bore providing 628.3 N push. The fixed NBR bumper is not a position lock, so the rod will drift if air pressure drops or the valve centers—add an external rod lock or pilot-operated check valve if your application requires fail-safe load holding. To order, confirm the 10 mm stroke, NPT1/8 port, and the male M14x1.5 rod thread.
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ32X10BT uses a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. For high-speed or high-energy cycles, you should slow the approach speed or install an external shock absorber to prevent end-stop damage.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.