verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ32X10SBT

The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X10SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 10mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ32 mm
  • Stroke10 mm
  • Port sizePT1/8
  • Acting typeDouble acting
  • Rod threadM8×1.25 (F) / M14×1.5 (B)
  • ConfigurationStandard compact
$36.24 $43.74Save 17% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ32 stroke, mounting and version on one page All ACQ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ32X10SBT

The AirTAC ACQ32X10SBT is a double-acting JIS compact cylinder engineered for tight axial spaces, delivering a push force of 402.1 N and a pull force of 301.6 N at 0.5 MPa. Its short C-clip and riveted body design drastically reduces overall length compared to standard round-body options, making it ideal for 10 mm movements in cramped machinery. The hard-anodized 32 mm bore ensures durable operation across the 0.15-1.0 MPa pressure range.

This specific configuration includes an S option for a built-in piston magnet, allowing seamless integration with AirTAC reed or electronic switches via the body's peripheral grooves. The B option equips the 16 mm piston rod with a male M14x1.5 thread for direct load coupling. End-of-travel deceleration relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, absorbing impact effectively within the 30-500 mm/s speed range. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ32X10SBT Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ32X10SBT
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ32 mm
Stroke10 mm
Acting typeDouble acting
Port sizePT1/8
Rod end threadM8×1.25 female / M14×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N302 N
0.7 MPa563 N—
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ32X10SBT

ACQJIS compact (thin) double-acting cylinder series.
32Bore size in mm.
×10Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ32X10SBT Is Used

precision_manufacturing

PCB Edge Guiding

Provides 402.1 N of precise lateral push to align printed circuit boards on a conveyor before pick-and-place assembly, utilizing the 10 mm stroke for rapid micro-adjustments.

package_2

Film Feed Nipping

Drives a small rubber roller to pinch packaging film during cutting cycles, where the male M14x1.5 rod secures the roller and the magnet tracks cycle completion.

factory

Component Ejection

Ejects small machined aluminum parts from a fixture, using the compact C-clip body to fit within a dense multi-station transfer line without adding axial bulk.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ32X10SBT the Right Cylinder?

Selecting this 32 mm bore model makes sense when your application requires roughly 402 Newtons of extend force at 0.5 MPa. If you need less power, stepping down to the 25 mm bore yields 245.4 N of push, while moving up to the 40 mm bore provides 628.3 N. Keep in mind that a standard double-acting cylinder like this will drift and lose its position if air pressure drops or the valve is centered; the fixed NBR bumper only decelerates the piston near the stroke end and does not function as a locking brake. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.

When requesting a quote, verify that the 10 mm stroke, NPT1/8 port, male M14x1.5 rod thread, and magnetic switch compatibility match your mounting envelope and sensing requirements.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ32X10SBT FAQ

At 0.5 MPa, this 32 mm bore cylinder generates 402.1 N of push force and 301.6 N of pull force. At 0.7 MPa, the push force increases to 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and a speed range of 30-500 mm/s.

It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion. If your cycle speed or moving mass is high, you should add an external shock absorber or slow the approach. Additionally, it does not hold its load if air is lost; the piston will drift, requiring an external rod lock for fail-safe positioning.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ32X10SBT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ32X10SBT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.