
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X10ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 10mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X10ST is a double-acting JIS compact cylinder engineered for tight axial spaces. A short C-clip and riveted piston-to-rod body design significantly reduces overall depth compared to standard round-body units. Delivering 402.1 N of push force at 0.5 MPa, it is built for short-stroke actuation where footprint matters.
This 32mm bore variant features a 16mm piston rod and a NPT1/8 port. Equipped with the -S option, it includes a built-in piston magnet compatible with AirTAC reed or electronic switches via peripheral body slots. Deceleration relies on a fixed NBR elastomer bumper at each end, not an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X10ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the rapid 10mm push to fold and lock minor carton flaps on high-speed packaging lines.
Actuates a safety interlock door on a turning center where axial mounting depth is highly restricted.
Powers a short-stroke routing gate to sort small parcels between adjacent conveyor belts.
For sizing context, the adjacent 25mm bore yields 245.4 N push at 0.5 MPa, while the larger 40mm bore provides 628.3 N. If your mechanism must maintain position during air loss or valve centering, note that this cylinder will drift; an external rod lock or pilot-operated check valve is required for fail-safe holding. To order, confirm the 32mm bore, 10mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the -S magnet option.
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. Operating speed ranges from 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not field-adjustable. It also does not hold its load unpowered; the piston drifts when air is removed, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.