
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X10T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 10mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X10T is a double-acting JIS compact cylinder engineered for tight axial spaces, utilizing a C-clip and riveted piston-to-rod assembly to minimize overall length. At 32 mm bore, it generates 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, making it robust enough for substantial actuation despite its very short 10 mm stroke.
This unit features a 16 mm piston rod and a NPT1/8 port. It relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. While the body includes grooves for position detection, this specific configuration ships without a magnet, so adding a reed or electronic switch requires an -S variant. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X10T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a rapid 10 mm kick to eject molded parts from a machining fixture using 402.1 N of extend force without consuming valuable machine footprint.
Drives a compact folding arm on a carton erector to tuck end flaps, leveraging the short 16 mm piston rod and NBR bumper to handle abrupt stops.
Secures circuit boards during automated soldering or inspection, applying precise 301.6 N retract force while maintaining a minimal 32 mm body profile.
When sizing this 32 mm bore actuator, stepping down to a 25 mm bore yields 245.4 N push at 0.5 MPa, whereas stepping up to a 40 mm bore provides 628.3 N push. The 10 mm stroke is ideal for brief, high-force movements, but verify your circuit design: a plain ACQ does not hold its load if air pressure drops or the valve centers, as the rod will drift and the fixed bumper only decelerates near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required. Confirm your ordering essentials: 32 mm bore, 10 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and no sensor magnet.
Quick checklist
The 32 mm bore provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, it uses fixed NBR elastomer bumpers at the stroke ends rather than a field-adjustable air cushion, so high-energy cycles may need external shock absorption. Additionally, this specific model lacks the internal magnet; you must specify the -S option to use AirTAC reed or electronic switches in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.