
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X15BFBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 15mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X15BFBT is a double-acting JIS compact cylinder engineered to deliver 402.1 N of push force at 0.5 MPa. It uses a short C-clip and riveted piston-to-rod assembly, drastically reducing overall axial length to save mounting depth where a conventional round-body unit will not fit. This specific configuration includes an FB mounting bracket and a male M14x1.5 threaded piston rod end for direct load coupling.
This 32mm bore variant features a NPT1/8 port and relies on a fixed NBR elastomer bumper at each end stop to absorb impact. It is not an adjustable air cushion, so high kinetic energy applications should incorporate an external shock absorber or decelerate the approach speed. The body includes sensor grooves, but this particular SKU ships without a magnet, so position sensing is not supported without modification. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X15BFBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures aluminum billets onto machining centers using the male M14x1.5 rod end, providing 402.1 N of clamping thrust within a tight column footprint.
Actuates a short routing flap on a packaging conveyor line, utilizing the FB bracket to anchor the body firmly against lateral shifting forces.
Pushes bushings into housings on an assembly carousel, relying on the fixed NBR bumper to arrest the 15mm stroke without requiring external adjustment.
When sizing your pneumatic drive, note that stepping down to a 25mm bore yields 245.4 N of push at 0.5 MPa, while stepping up to a 40mm bore provides 628.3 N. This ACQ32X15BFBT model is ordered with a 32mm bore, 15mm stroke, NPT1/8 port, male M14x1.5 rod thread, and an FB mounting bracket.
Keep in mind that a standard compact cylinder does not hold its position if air pressure is lost or the control valve is centered; the rod will drift, and the fixed bumper only decelerates the piston near the stroke end. If your application requires fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
This 32mm bore double-acting cylinder provides 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. The maximum standard stroke available for this bore size is 100 mm.
No. While the cylinder body features integrated sensor grooves, this specific model does not include the internal magnet required for detection. To use AirTAC reed or electronic switches, you must select a model with the -S option code.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.