
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X15BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 15mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X15BT is a double-acting JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its C-clip and riveted piston-to-rod assembly yield an exceptionally short body, saving valuable axial mounting depth in tight machinery footprints compared to standard round-body units.
This specific configuration features a male M14x1.5 thread on the 16 mm piston rod for direct load coupling. Deceleration at the 15 mm stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed cycles may require slowing the approach or adding external shock absorbers. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X15BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extend force at 0.5 MPa to secure aluminum workholding blocks during light CNC milling operations.
Uses the short 15 mm stroke and male M14x1.5 rod to actuate a small diverter flap on a 32 mm packaging conveyor belt.
Pushes processed test tubes out of a centrifuge carousel with a compact footprint that fits within tight laboratory automation frames.
When sizing this 32 mm bore actuator, consider stepping down to the 25 mm version for 245.4 N push, or up to the 40 mm model for 628.3 N push at 0.5 MPa. The ACQ32X15BT ships without a sensor magnet, though the body retains switch grooves for later upgrades; ordering essentials include confirming the NPT1/8 port, the 15 mm stroke, and the male M14x1.5 rod thread.
Because a standard compact cylinder lacks a locking mechanism, the rod will drift if air pressure drops or the directional valve centers. The fixed NBR bumper only absorbs end-of-travel impacts and cannot hold a suspended load, so an external rod lock or pilot-operated check valve is necessary for fail-safe positioning.
Quick checklist
At 0.5 MPa, this 32 mm bore cylinder provides 402.1 N push and 301.6 N pull force. At 0.7 MPa, the push force is 562.9 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
This model uses a fixed NBR elastomer bumper at each end, not a field-adjustable air cushion. Additionally, the ACQ32X15BT ships without a sensor magnet; while the body features grooves for AirTAC reed or electronic switches, you must specify an -S option code to enable position sensing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.