
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X15SBFBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 15mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X15SBFBT is a double-acting JIS compact cylinder engineered for tight axial spaces. Its short C-clip and riveted body design significantly reduces mounting depth compared to round-body alternatives. At 32mm bore, it generates 402.1 N push and 301.6 N pull force at 0.5 MPa, making it suitable for medium-duty positioning tasks.
This configuration includes a built-in piston magnet (-S) for position sensing with AirTAC reed or electronic switches, a male-thread rod end (-B, M14x1.5) for direct load coupling, and an FB mounting bracket. The NPT1/8 port and fixed NBR elastomer bumper at each end ensure reliable operation without the complexity of adjustable cushions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X15SBFBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates a short-stroke routing flap on a logistics conveyor line, utilizing the 402.1 N extend force and FB bracket to securely redirect parcels.
Locks aluminum workpieces in a machining vise via the male M14x1.5 threaded rod, providing stable 301.6 N retract tension during milling.
Drives a short 15mm compression stroke on a case erector head, relying on the NBR bumper to absorb the end-stop impact without adjustable cushioning.
When sizing this 32mm bore, stepping down to a 25mm bore yields 245.4 N push, while stepping up to a 40mm bore provides 628.3 N push at 0.5 MPa. For this specific build, confirm the 15mm stroke, NPT1/8 port, male M14x1.5 rod thread, the -S magnet for sensors, and the FB mounting bracket interface.
Note that a plain ACQ cylinder does not hold its position or load if air pressure is lost or the valve is centered; the piston will drift. The fixed NBR bumper only decelerates the rod near stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
This 32mm bore double-acting cylinder generates 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, speed range is 30-500 mm/s, and temperature range is -20 to +70 C.
It uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not a field-adjustable air cushion; for high energy cycles, slow the approach or add an external shock absorber. The included -S magnet allows tracking via AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.