
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X15SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 15mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X15SBT is a double-acting JIS compact cylinder engineered for tight axial spaces, utilizing a short C-clip and riveted body design that significantly reduces mounting depth compared to round-body units. Operating at 0.5 MPa, it generates 402.1 N of push force and 301.6 N of pull force, making it well-suited for medium-duty industrial handling.
This specific configuration includes a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic switches, and a male M14x1.5 threaded rod end (-B) for direct load coupling. The 32 mm bore features a NPT1/8 port and relies on fixed NBR elastomer bumpers at each end to absorb end-stop impact rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X15SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extend force at 0.5 MPa to securely clamp aluminum or steel workpieces within a machining center, saving valuable Z-axis depth.
Acts as a short-stroke diverter on a packaging conveyor, using the male M14x1.5 thread to mount a polymer flap that redirects cartons at high speed.
Pushes bearings or bushings into housings on an automated assembly line, relying on the built-in magnet to trigger an electronic sensor upon insertion completion.
When sizing this 32 mm bore actuator, consider stepping down to the 25 mm version if your application requires less force, as it provides 245.4 N of push at 0.5 MPa. Conversely, if you need greater thrust, the 40 mm bore offers 628.3 N of push at 0.5 MPa. Keep in mind that a standard ACQ body will drift and lose its position if air pressure drops or the valve is centered; the fixed NBR bumper only decelerates the piston near the stroke end and does not function as a locking brake. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order this exact unit, confirm the 32 mm bore, 15 mm stroke, NPT1/8 port, S magnet, and B male-thread rod specifications.
Quick checklist
The 32 mm bore yields a push force of 402.1 N and a pull force of 301.6 N at 0.5 MPa, increasing to 562.9 N push at 0.7 MPa, with a maximum push capacity of 82 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa, speeds of 30-500 mm/s, and temperatures from -20 to +70 C.
No, the ACQ32X15SBT uses fixed NBR elastomer bumpers at both ends to decelerate the piston, which are not field-adjustable. If your cycle speed or kinetic energy is exceptionally high, you should add an external shock absorber or throttle the approach speed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.