
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X15ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 15mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X15ST is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body to minimize axial mounting depth where a round-body unit will not fit. It yields 402.1 N of push force and 301.6 N of pull force at 0.5 MPa.
This 32 mm bore variant features a 16 mm piston rod, a NPT1/8 port, and a default female M8x1.25 rod-end thread. The integrated -S magnet works directly with AirTAC reed or electronic switches fitted into the body grooves, while fixed NBR bumpers absorb end-stop impact without requiring field adjustment. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X15ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures aluminium billets in a machining vice, using the 402.1 N extend force to lock parts firmly for high-speed milling.
Drives a short 15 mm stroke pop-up gate on a packaging line to sort cartons into secondary lanes without occupying longitudinal frame space.
Pushes small plastic moulded parts out of an injection tool cavity, utilizing the compact C-clip body to fit within tight mold bases.
For sizing context, stepping down to the 25 mm bore yields 245.4 N push, whereas stepping up to the 40 mm bore provides 628.3 N push at 0.5 MPa. Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve is centred; the rod drifts, and the fixed NBR bumper only decelerates it near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
When ordering, verify this configuration: 32 mm bore, 15 mm stroke, NPT1/8 port, built-in magnet (S), and a female M8x1.25 rod thread.
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ32X15ST uses a fixed elastomer NBR bumper at each end to absorb end-stop impact. It is not a field-adjustable air cushion. For high-speed or high-energy cycles, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.