
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X15T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 15mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X15T is a double-acting JIS compact cylinder engineered for tight axial spaces. A short C-clip and riveted piston-to-rod connection drastically reduce overall length compared to round-body alternatives. Delivering 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, it suits short 15 mm stroke movements perfectly.
This 32 mm bore unit features a 16 mm piston rod and a NPT1/8 port. Deceleration relies on a fixed NBR elastomer bumper at each end stop rather than an adjustable air cushion. The body includes grooves for magnetic switches, though this specific configuration ships without a sensor magnet installed. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X15T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives a short 15 mm Z-axis plunge on a desktop PCB routing spindle, utilizing the 402.1 N extend force to cleanly cut copper-clad FR4 blanks.
Actuates the upper heat platen on a rotary blister packaging line, where the short 32 mm bore body minimizes frame height and maximizes throughput.
Provides the primary open and close stroke for an angular pneumatic gripper assembly handling small machined aluminum fittings.
When sizing this 32 mm bore actuator, stepping down to a 25 mm bore yields 245.4 N of push at 0.5 MPa, while stepping up to a 40 mm bore provides 628.3 N. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Note that a plain compact cylinder drifts if air pressure drops or the valve is centered; the fixed bumper only decelerates the piston near stroke end and does not lock the load. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
At 0.5 MPa this 32 mm bore cylinder generates 402.1 N of push force and 301.6 N of pull force. At 0.7 MPa the push force is 562.9 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb the stop impact; it is not an adjustable air cushion, so for high energy you should slow the approach or add an external shock absorber. Additionally, the bumper only decelerates the piston and does not lock the load—if air is lost, the rod will drift unless you fit an external rod lock.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.