
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X20BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 20mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X20BT is a double-acting JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces axial mounting depth compared to round-body alternatives, saving valuable machine footprint space. The bore is hard-anodized for longevity, and the unit operates smoothly across a 30-500 mm/s speed range.
This specific configuration includes a male-thread piston rod end (M14x1.5) for direct mechanical coupling to your load. Deceleration at stroke extremes is handled by fixed NBR elastomer bumpers rather than an adjustable air cushion, meaning operators should slow high-velocity approaches or utilize external shock absorbers for heavy kinetic energy. While the body features integrated magnetic-switch grooves, this particular unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X20BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extend force to secure aluminum workpieces in a CNC machining center vise, utilizing the male M14x1.5 thread for a direct jaw coupling.
Drives a short 20mm stroke folding arm on a continuous motion packaging line to tuck corrugated cardboard flaps prior to sealing.
Actuates a routing flap on a conveyor sorting station, pushing lightweight parcels onto a secondary track with rapid 30-500 mm/s cycle speeds.
When sizing your pneumatics, the 32mm bore offers a middle-ground solution. Stepping down to the 25mm bore reduces the push force to 245.4 N at 0.5 MPa, while stepping up to the 40mm bore increases it to 628.3 N at 0.5 MPa. Ensure your specifications match the 20mm stroke, NPT1/8 port, male M14x1.5 rod thread, and the absence of a sensor magnet. Note that a standard double-acting cylinder will not hold its position if air pressure drops or the valve is centered; the rod drifts, and the fixed NBR bumper only absorbs the end stop. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
The ACQ32X20BT generates 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at each end to absorb end-stop impact, which are not field-adjustable. Additionally, while the body has sensor grooves, this model ships without an internal magnet, so you cannot use reed or electronic switches without a different configuration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.