
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X20CBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 20mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X20CBT is a double-acting JIS compact cylinder engineered for space-constrained machinery, delivering a 402.1 N push at 0.5 MPa and a 301.6 N pull. Its C-clip and riveted piston-to-rod assembly drastically reduce axial depth compared to standard round-body units, yielding a highly efficient footprint for a 32 mm bore.
This specific configuration includes a CB mounting bracket and a female M8x1.25 rod end thread coupled to a 16 mm piston rod. End-of-travel energy is managed by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed cycles may require an external shock absorber to prevent wear. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X20CBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 402.1 N push needed to actuate tooling gates on printed circuit board drilling lines, where the short 20 mm stroke and compact depth fit tight linear carriages.
Drives a 32 mm bore tucking arm on case erecting machinery, using the CB bracket to pivot the mechanism and cleanly fold cardboard flaps at cycle speeds up to 500 mm/s.
Actuates a routing flap on a beverage conveyor, leveraging the 301.6 N retract force to pull the diverter clear and let standard containers pass without collision.
Choosing this 32 mm bore makes sense when your application requires roughly 400 N of extension force. If you need slightly less thrust, the 25 mm bore offers 245.4 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628.3 N. Keep in mind that a standard ACQ body does not hold position upon air loss; the rod drifts, so a pilot-operated check valve or external rod lock is necessary for fail-safe load holding.
When ordering, verify your requirements against this model's attributes: a 20 mm stroke, NPT1/8 port, female rod thread, and CB clevis bracket. Because this variant lacks the S option, it ships without a sensor magnet, though the body retains switch grooves for future upgrades.
Quick checklist
This 32 mm bore double-acting cylinder generates 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
It relies on a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion or a locking brake. If air pressure drops, the piston will drift and cannot hold a load without an external rod lock. The female M8x1.25 rod end couples directly to your load without side-play tolerance.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.