
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X20FAT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 20mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X20FAT is a double-acting JIS compact cylinder engineered with a 32mm bore and 20mm stroke. It yields a push force of 402.1 N and a pull force of 301.6 N at 0.5 MPa. Its integrated C-clip and riveted piston-rod joint drastically reduce axial length, making it the ideal direct solution when a standard round-body unit is too deep for your machine footprint.
This specific configuration ships with an FA foot mounting bracket for secure base mounting. The 32mm bore dictates a NPT1/8 port and a 16mm piston rod with a female M8x1.25 end thread. Instead of an adjustable air cushion, the body incorporates fixed NBR elastomer bumpers at both ends to absorb end-stop impact. The outer body features integrated magnetic-switch grooves, though this particular SKU omits the internal sensor magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X20FAT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides compact 402.1 N push strokes to eject plastic parts from injection molding dies where machine headroom is severely restricted.
Drives 20mm diverter arm movements on packaging lines to route bottles, utilizing the FA bracket for rigid base mounting.
Secures aluminum workpieces inside CNC machining centers, taking advantage of the short body depth to maximize tool clearance.
When sizing your actuator, consider stepping down to the 25mm bore (delivering 245.4 N push at 0.5 MPa) for lighter duties, or stepping up to the 40mm bore (providing 628.3 N push at 0.5 MPa) if your load demands greater thrust. To confirm your ordering essentials for this unit: 32mm bore, 20mm stroke, NPT1/8 port, female rod thread, FA foot bracket, and no magnet.
Keep in mind that a standard ACQ body does not hold its position or secure a load if air pressure drops or the control valve is centered; the rod will drift. The fixed NBR bumper only decelerates the piston near stroke end and acts as neither a lock nor a brake. If your application demands fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This 32mm bore double-acting cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at 0.15-1.0 MPa with a speed range of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at both ends to absorb shock, which is not a field-adjustable air cushion. For high-speed operations, add an external shock absorber. It does not hold a load on air loss; the rod drifts, requiring an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.