
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X20SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 20mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X20SBT is a double-acting JIS compact cylinder engineered to save axial mounting depth. Its short C-clip and riveted piston-to-rod body construction yields a highly space-efficient footprint compared to traditional round-body units. Delivering 402.1 N of push force at 0.5 MPa, it is built for tight assembly layouts.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread rod end (-B). The 16 mm diameter piston rod terminates in an M14x1.5 male thread for direct load coupling. End-of-stroke energy is absorbed by a fixed NBR elastomer bumper, meaning the stopping impact is not field-adjustable. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X20SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of push force at 0.5 MPa to secure aluminum workpieces inside a machining center fixture.
Actuates a short-stroke routing flap on a 20 mm travel pivot to sort medium-weight cartons on a packaging line.
Drives a 16 mm rod with an M14x1.5 male thread to press small bearings into sheet metal housings.
Operating at 0.5 MPa, this 32 mm bore generates 402.1 N of push force. If you need less force, the next size down is the 25 mm bore providing 245.4 N; if your application requires more, the 40 mm bore offers 628.3 N. Keep in mind that a plain ACQ cylinder will drift and cannot hold a load if air pressure drops or the valve is centered—an external rod lock or pilot-operated check valve is required for fail-safe position holding. To order this exact unit, confirm the 32 mm bore, 20 mm stroke, NPT1/8 port, male M14x1.5 rod thread, and the magnetic piston.
Quick checklist
The 32 mm bore provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The maximum standard stroke available for this bore is 100 mm.
End-of-travel deceleration relies on a fixed NBR elastomer bumper, not an adjustable air cushion; for high-speed cycles you should slow the approach or add an external shock absorber. The built-in magnet allows you to mount AirTAC reed or electronic switches directly into the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.