
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X20ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 20mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X20ST is a double-acting JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body architecture significantly reduce axial mounting depth compared to round-body units, making it ideal for tight machine footprints. The hard-anodized aluminum bore ensures long service life while operating at speeds between 30 and 500 mm/s.
This specific unit includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic solid-state switches, fitting into the sensor grooves around the body. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion. The 16 mm piston rod features a female M8x1.25 end thread for direct load coupling, and the air supply connects via a NPT1/8 port. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X20ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extension force to secure aluminum housings inside CNC machining vices where axial mounting space is strictly limited.
Drives the 20 mm stroke sealing mechanism on continuous flow wrappers, using the integrated magnet to trigger the cut and seal cycle via a solid-state switch.
Actuates a sorting flap on a packaging line to redirect small plastic bottles, relying on the fixed NBR bumper to absorb the impact at the end of the stroke.
When sizing this 32 mm bore model, consider stepping down to a 25 mm bore (245.4 N push @0.5 MPa) for lighter duties, or up to a 40 mm bore (628.3 N push @0.5 MPa) if your application requires greater thrust. Keep in mind that a plain ACQ cylinder does not hold its position if air pressure drops or the valve is centered; the rod will drift, and the fixed bumper only decelerates it near the end of travel. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
To order this exact configuration, confirm the 32 mm bore, 20 mm stroke, NPT1/8 porting, the -S magnet option for position sensing, and the default female M8x1.25 rod-end thread.
Quick checklist
This 32 mm bore double-acting cylinder generates 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa at speeds of 30-500 mm/s.
No, the ACQ32X20ST uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not a field-adjustable air cushion. Additionally, it does not feature a locking mechanism; if air is lost, the piston drifts. For high-speed applications, use an external shock absorber, and for position holding, install an external rod lock.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.