
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X20T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 20mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X20T is a double-acting JIS compact air cylinder engineered for tight axial spaces. Its short C-clip and riveted piston-rod design drastically reduce overall length compared to round-body units. At 32 mm bore, it generates 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, making it a solid choice for mid-range actuation.
This specific configuration features a 16 mm piston rod with a female M8x1.25 end thread and a NPT1/8 port. Instead of an adjustable air cushion, it relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. The body includes grooves for magnetic switches, though this particular model ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X20T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extend force at 0.5 MPa to secure aluminum housings inside machining centers, where the short 20 mm stroke saves valuable Z-axis depth.
Actuates a pneumatic routing flap on packaging lines, using its 301.6 N retract force to pull the gate clear of passing cardboard cartons.
Applies controlled downward pressure on material samples, relying on the fixed NBR bumper to soften the impact at the end of the 20 mm travel.
When sizing your drive, consider stepping down to the 25 mm bore (245.4 N push @0.5 MPa) for lighter duties, or up to the 40 mm bore (628.3 N push @0.5 MPa) if you need greater thrust. Keep in mind that a plain ACQ cylinder will not hold a load if air pressure drops or the valve is centered; the rod drifts and the fixed NBR bumper only decelerates it near the stroke end. For fail-safe positioning, add an external rod lock or pilot-operated check valve. To order this unit correctly, confirm the 32 mm bore, 20 mm stroke, NPT1/8 port, female rod thread, and no magnet.
Quick checklist
This 32 mm bore double-acting cylinder delivers 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb shock, which is not field-adjustable. If your application involves high kinetic energy or fast speeds, you should slow the approach or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.