
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X25SLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 25mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X25SLBT is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. It produces 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. The short C-clip and riveted body design significantly reduces axial mounting depth compared to traditional round-body alternatives, freeing up valuable machine footprint.
This specific configuration includes a built-in piston magnet (-S) for position sensing, a male-thread M14x1.5 piston rod end (-B) for secure load coupling, and an LB mounting bracket. The 32 mm bore uses a NPT1/8 port and relies on a fixed NBR elastomer bumper at stroke ends to absorb impact rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X25SLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides compact push-off force for ejecting plastic parts from injection molds, where the short body depth prevents interference with the mold platen.
Drives a diverter arm on a packaging conveyor line, using the male rod thread to securely attach the linkage and the sensor magnet for timing.
Secures printed circuit boards during routing or inspection, benefiting from the fixed NBR bumper to prevent harsh impact on delicate workpieces.
When sizing this double-acting model, consider stepping down to the 25 mm bore if your application requires less than 245.4 N of push force at 0.5 MPa, or moving up to the 40 mm bore for 628.3 N if the 32 mm falls short. To finalize your build, confirm the 32 mm bore, 25 mm stroke, NPT1/8 port, male M14x1.5 rod thread, LB bracket, and the integrated magnet for reed or electronic switches.
Remember that a standard compact cylinder does not hold its load if air pressure drops or the valve is centered; the rod will drift. If your machine requires fail-safe position holding, you must add an external rod lock or a pilot-operated check valve to the assembly.
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not a field-adjustable air cushion. For high-speed or high-energy loads, you should slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.