
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X25T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 25mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X25T is a double-acting, single-rod JIS compact cylinder engineered for tight axial spaces. Its short C-clip and riveted piston-to-rod body design drastically reduces overall length compared to round-body units, saving valuable machine footprint. At 32 mm bore, it provides 402.1 N push and 301.6 N pull force at 0.5 MPa.
This 25 mm stroke model features a 16 mm hard-anodized piston rod and an M8x1.25 female thread end. Deceleration is handled by fixed NBR elastomer bumpers at each end, not adjustable cushions. The body includes magnetic-switch grooves for position sensing, though this specific SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X25T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extend force to push small plastic parts out of injection molds, where the short 25 mm stroke and compact C-clip body fit neatly within tight mold platens.
Actuates a routing gate on a packaging conveyor belt. The 32 mm bore supplies ample push to deflect cardboard cartons, while the fixed NBR bumper absorbs the end-of-stroke impact reliably.
Drives a secondary safety latch on a CNC lathe sliding door. The 16 mm rod and M8x1.25 female thread couple directly to the latch mechanism, operating safely within the 30-500 mm/s speed range.
This 32 mm bore generates 402.1 N push at 0.5 MPa. If your application needs less force, step down to the 25 mm bore offering 245.4 N push; if you require more power, step up to the 40 mm bore delivering 628.3 N push. When ordering, confirm the 25 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and that no sensor magnet (-S) is required for your setup.
Note that a plain ACQ cylinder does not hold its load if air pressure drops or the valve is centred—the piston will drift. For fail-safe position holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
The 32 mm bore double-acting cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The operational speed range is 30-500 mm/s.
No, the ACQ32X25T uses fixed NBR elastomer bumpers at both stroke ends to absorb end-stop impact. It is not an adjustable air cushion. For high kinetic energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.