
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X30SBCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 30mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X30SBCBT is a double-acting, single-rod JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduce axial mounting depth compared to traditional round-body units, saving valuable machine footprint. The bore is hard-anodized for wear resistance, and it integrates an NBR elastomer bumper at each end to absorb end-stop impact.
This specific configuration includes a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic switches along the body grooves. It features a male-thread piston rod end (-B) sized at M14x1.5 for direct load coupling, and is equipped with a CB mounting bracket for pivot-style installations. The NPT1/8 port ensures reliable pneumatic supply for the 30 mm stroke. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X30SBCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extend force at 0.5 MPa to secure aluminum workpieces inside a CNC machining center vise, utilizing the male M14x1.5 thread for a solid mechanical coupling.
Acts as a compact 30 mm stroke diverter on a packaging line conveyor, using the CB bracket to pivot the arm and redirect small cardboard cartons at speeds up to 500 mm/s.
Pushes electronic connectors into PCB assemblies with reliable 562.9 N of force at 0.7 MPa, relying on the integrated magnet to trigger an electronic switch at the stroke end.
When sizing this 32 mm bore actuator, consider stepping down to the 25 mm bore (245.4 N push @0.5 MPa) for lighter duties, or up to the 40 mm bore (628.3 N push @0.5 MPa) if your application requires greater thrust. This model is configured with a 30 mm stroke, a NPT1/8 port, the -S magnet for sensing, and a male M14x1.5 rod thread (-B) paired with a CB bracket. Note that a standard ACQ body does not hold its position if air pressure is lost or the valve is centered; the rod will drift. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with an operating speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not field-adjustable. For high kinetic energy or fast cycle speeds, you should slow the approach speed or install an external shock absorber to protect the 30 mm stroke mechanism.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.