
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X30SBLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 30mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X30SBLBT is a double-acting JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body construction significantly reduces overall axial length compared to traditional round-body cylinders, saving valuable mounting depth in tight machinery layouts. The bore is hard-anodized for extended wear resistance, and the unit operates at speeds between 30 and 500 mm/s.
This specific configuration includes a built-in piston magnet (-S) for position sensing, a male-thread piston rod end (-B) sized at M14x1.5 for direct load coupling, and an LB mounting bracket. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning external shock absorbers should be added for high-energy loads. The NPT1/8 port ensures reliable pneumatic supply to the 32 mm bore. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X30SBLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 402.1 N push stroke needed to form and seal cardboard carton blanks on high-speed packaging lines, utilizing the LB bracket for secure side mounting.
Shifts heavy machine tool safety doors open and closed using the male M14x1.5 rod thread, fitting into the narrow footprint of modern CNC enclosures.
Actuates a routing flap on a modular conveyor network to push aluminum pallets onto a secondary processing track without stalling the main belt.
When sizing this 32 mm bore actuator, consider stepping down to the 20 mm bore for lighter tasks, which yields 157.1 N of push force at 0.5 MPa, or moving up to the 40 mm bore to gain 628.3 N of thrust at the same pressure. The ACQ32X30SBLBT configuration confirms your essential ordering parameters: a 32 mm bore, 30 mm stroke, NPT1/8 port, male M14x1.5 rod thread, LB bracket mount, and an integrated sensor magnet.
Keep in mind that a standard double-acting cylinder of this type does not hold its position if air pressure is lost or the directional valve is centered; the rod will drift. If your application requires a fail-safe load hold, an external rod lock or a pilot-operated check valve must be installed separately.
Quick checklist
This 32 mm bore cylinder provides 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 562.9 N. The maximum push capacity is 82 kgf at 1.0 MPa, and the maximum standard stroke available for this bore is 100 mm.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which cannot be field-adjusted. Additionally, it does not function as a lock; the piston will drift if air supply is lost, so an external rod lock is required for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.