
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X30SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 30mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X30SBT is a double-acting, single-rod JIS compact cylinder engineered for space-constrained pneumatics. A short C-clip and riveted piston-to-rod assembly radically reduce overall axial depth compared to conventional round-body units, delivering 402.1 N of push force at 0.5 MPa from a 32 mm bore.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread piston rod end (-B, M14x1.5) that couples directly to your tooling. The bore is hard-anodized for longevity, while fixed NBR elastomer bumpers absorb end-stop impact instead of an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X30SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Uses the male M14x1.5 thread to securely bolt onto custom fixture jaws, providing 402.1 N of clamping force @0.5 MPa to hold aluminum blocks during milling.
Employs the integrated magnet to trigger electronic sensors for mid-stroke positioning, rapidly sorting glass containers on a high-speed packaging conveyor.
Leverages the short 30 mm stroke and compact body depth to push plastic parts out of tight mold cavities where axial mounting space is highly restricted.
When sizing your drive, consider stepping down to a 25 mm bore (providing 245.4 N push @0.5 MPa) for lighter duties, or up to a 40 mm bore (yielding 628.3 N push @0.5 MPa) if you need greater thrust. Note that a standard ACQ body will drift and cannot hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates the stroke near the end. For fail-safe positioning, add an external rod lock or pilot-operated check valve. To order this exact unit, confirm the 32 mm bore, 30 mm stroke, NPT1/8 port, male M14x1.5 rod thread, and the required magnetic switch.
Quick checklist
This 32 mm bore cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, runs at 30-500 mm/s, and uses a NPT1/8 port.
No. The ACQ32X30SBT uses fixed NBR elastomer bumpers at each end to absorb impact, not an adjustable air cushion. Additionally, it cannot hold a load mid-stroke if air is lost; the rod will drift. For fail-safe holding, an external rod lock is required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.