
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X30ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 30mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X30ST is a double-acting, single-rod JIS compact cylinder engineered for tight axial spaces. A short C-clip and riveted piston-to-rod assembly shrinks the overall footprint versus round-body alternatives. At 0.5 MPa, it generates 402.1 N of push force and 301.6 N of pull force, stepping up to 562.9 N at 0.7 MPa.
This 32 mm bore unit incorporates a built-in piston magnet (-S) for position detection via AirTAC reed or electronic switches seated in the body grooves. The 16 mm rod utilizes a female M8x1.25 end thread. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X30ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extend force at 0.5 MPa to secure aluminum workpieces inside a CNC machining center, fitting neatly into the tooling column.
Drives the side flap folding arms on a continuous motion case packer, where the 30 mm stroke and compact body depth minimize frame interference.
Actuates a routing flap on a modular conveyor system to push parcels down alternative sorting lanes using the built-in magnet for confirmatory position feedback.
When sizing this 402.1 N (at 0.5 MPa) unit, you can step down to the 25 mm bore for 245.4 N or up to the 40 mm bore for 628.3 N to match your exact load. A plain ACQ body will not hold a load if air pressure drops or the valve centers; the rod drifts, and the fixed NBR bumper only softens the end stop. For fail-safe holding, specify an external rod lock or pilot-operated check valve. To order this exact unit, confirm the 32 mm bore, 30 mm stroke, NPT1/8 port, the -S magnet option, and the female M8x1.25 rod thread.
Quick checklist
This 32 mm bore double-acting cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, speed range is 30-500 mm/s, and the port size is NPT1/8.
It uses a fixed NBR elastomer bumper at each end to absorb the stop impact; it is not an adjustable air cushion, so for high energy loads you should slow the approach or add an external shock absorber. The -S magnet option allows tracking via AirTAC reed or electronic switches mounted in the body slots.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.