
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X30T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 30mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X30T is a double-acting, single-rod JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod architecture significantly reduce overall axial length compared to conventional round-body units, saving valuable machine footprint depth.
This 32 mm bore variant features a 16 mm piston rod, a NPT1/8 port, and a female M8x1.25 rod-end thread for straightforward load coupling. End-of-stroke energy is managed by a fixed NBR elastomer bumper rather than an adjustable cushion, meaning high-speed applications may require external shock absorption or a slowed approach. The body includes sensor grooves, though this specific configuration ships without a magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X30T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Uses its 402.1 N extend force to push finished plastic parts out of small injection molding cavities where short axial depth is critical.
Actuates a 30 mm routing flap on a packaging line to sort bottles into secondary lanes with precise, compact motion.
Secures circuit boards during routing or drilling, utilizing the 16 mm rod to apply stable holding pressure without lateral play.
When sizing this 32 mm bore model, stepping down to a 25 mm bore yields 245.4 N of push force, while stepping up to a 40 mm bore provides 628.3 N at 0.5 MPa. To finalize your order, confirm the 30 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the absence of a magnet. Note that a plain ACQ cylinder does not hold its position if air pressure is lost or the valve is centered; the rod will drift, and the fixed bumper only decelerates it near the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
The ACQ32X30T generates 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not a field-adjustable cushion, so for high-energy cycles you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.