
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X35BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 35mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X35BT is a double-acting, single-rod JIS compact cylinder engineered for tight axial spaces. Its short C-clip and riveted body construction significantly reduces overall length compared to round-body alternatives, saving valuable machine footprint depth. Operating at 0.5 MPa, it generates 402.1 N of push force and 301.6 N of pull force.
This specific configuration includes the B option, providing a male M14x1.5 thread on the 16 mm piston rod for direct load coupling. The body features integrated grooves for mounting magnetic switches, though this particular unit ships without the magnet. Deceleration at stroke ends is handled by fixed NBR elastomer bumpers rather than adjustable pneumatic cushions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X35BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Ideal for pulling small plastic parts from injection molding dies, where the male M14x1.5 rod threads directly into a custom extractor tool and the short body saves mold-base depth.
Drives diverting gates on packaging conveyor lines, utilizing 402.1 N of extend force at 0.5 MPa to positively push lightweight cardboard cartons onto secondary routing tracks.
Acts as an auxiliary actuator for bar feeders or chuck openers on CNC lathes, operating reliably at speeds between 30 and 500 mm/s within the machine's coolant-laden environment.
For sizing context, stepping down to a 25 mm bore reduces the 0.5 MPa push force to 245.4 N, while moving up to a 40 mm bore increases it to 628.3 N. The 32 mm bore here offers a balanced middle ground for moderate actuation tasks.
When ordering, confirm the 35 mm stroke, NPT1/8 port, and the male M14x1.5 rod thread. Note that a standard ACQ body will drift and lose its position if air pressure drops or the valve is centered, as the fixed NBR bumper only decelerates the piston near the end of travel rather than locking it. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
The 32 mm bore generates a push force of 402.1 N and a pull force of 301.6 N at 0.5 MPa. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No. This model uses fixed NBR elastomer bumpers at each end to absorb shock, not an adjustable air cushion. Additionally, while the body has sensor grooves, this specific unit ships without a magnet; position sensing requires a model with the -S option and a reed or electronic switch.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.