
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X35SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 35mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X35SBT is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. Its C-clip and riveted piston-to-rod assembly drastically reduce axial depth compared to round-body alternatives. Delivering 402.1 N of push force at 0.5 MPa, it uses a 16 mm piston rod and a NPT1/8 port.
This specific configuration includes an -S piston magnet for direct mounting of AirTAC reed or electronic switches along the body grooves. The -B option provides a male M14x1.5 threaded rod end for straightforward load coupling. End-of-stroke energy is managed by fixed NBR elastomer bumpers rather than adjustable cushions, keeping the overall length minimal. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X35SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures printed circuit board panels during routing operations where the 402.1 N extend force firmly holds the substrate without crushing components.
Drives the mechanical arms that tuck minor flaps on packaging lines, utilizing the 35 mm stroke and male M14x1.5 rod for direct linkage.
Acts as a precise end-stop on cutoff saws, leveraging the short body length to fit within tight machine footprints while surviving high cycle rates.
When sizing this 32 mm bore actuator, consider stepping down to the 25 mm bore for lighter duties (245.4 N push @0.5 MPa) or up to the 40 mm bore if your application requires greater thrust (628.3 N push @0.5 MPa). The 35 mm stroke sits well within the 100 mm standard limit for this bore family, with long-stroke variants available up to 300 mm.
Remember that a standard compact cylinder does not hold its position if air pressure drops or the valve is centered; the rod will drift. For fail-safe load holding, integrate an external rod lock or pilot-operated check valve. To order, confirm the 32 mm bore, 35 mm stroke, NPT1/8 port, built-in magnet, and male M14x1.5 rod thread.
Quick checklist
This 32 mm bore cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, and 562.9 N push at 0.7 MPa. The maximum push force is 82 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, it uses fixed NBR elastomer bumpers at both ends to absorb end-stop impact. It is not an adjustable cushion. For high-speed or high-energy loads, you should slow the approach speed or install an external shock absorber to prevent damage.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.