
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X35ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 35mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X35ST is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. It generates 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, utilizing a 32 mm bore and a 35 mm stroke. The riveted C-clip body design drastically reduces axial footprint compared to standard round-body alternatives.
This unit includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches via the integrated body grooves. End-of-travel deceleration is handled by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption. The 16 mm piston rod features a default female M8x1.25 thread, operating at speeds from 30 to 500 mm/s with a NPT1/8 air port. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X35ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures aluminum engine blocks onto machining centers using 402.1 N of extend force, fitting neatly into tight multi-axis tombstone layouts.
Drives mechanical flap folders on high-speed packaging lines, relying on the 35 mm stroke and NBR bumper to absorb rapid end-stop impacts.
Pivots sorting gates on parcel conveyors, utilizing the integrated magnet for precise position confirmation via solid-state sensors.
When sizing this 32 mm bore model, stepping down to a 25 mm bore yields 245.4 N of push force at 0.5 MPa, while stepping up to a 40 mm bore provides 628.3 N. Be aware that a standard ACQ does not hold its position if air pressure drops or the valve is centered; the rod will drift, and the fixed bumper only decelerates the end stop. For fail-safe load holding, an external rod lock or pilot-operated check valve is necessary. To order, confirm the 32 mm bore, 35 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the required -S magnet option.
Quick checklist
This 32 mm bore cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push capacity of 82 kgf at 1.0 MPa. The maximum standard stroke available for this bore size is 100 mm.
No, it uses a fixed NBR elastomer bumper at each end rather than a field-adjustable air cushion. The standard configuration features a female M8x1.25 rod-end thread on a 16 mm rod; selecting the B option would provide a male M14x1.5 thread instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.