verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ32X35T

The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X35T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 35mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ32 mm
  • Stroke35 mm
  • Port sizePT1/8
  • Acting typeDouble acting
  • Rod threadM8×1.25 (F) / M14×1.5 (B)
  • ConfigurationStandard compact
$36.24 $43.74Save 17% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ32 stroke, mounting and version on one page All ACQ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ32X35T

The AirTAC ACQ32X35T is a double-acting, single-rod JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces axial mounting depth compared to traditional round-body alternatives, making it highly effective for machinery where space savings are critical.

This 32mm bore unit features a 16mm piston rod and a female M8x1.25 rod-end thread for secure load coupling. Instead of an adjustable air cushion, it relies on fixed NBR elastomer bumpers at both ends to absorb end-stop impact. The body retains magnetic-switch grooves, though this specific configuration ships without a sensing magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ32X35T Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ32X35T
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ32 mm
Stroke35 mm
Acting typeDouble acting
Port sizePT1/8
Rod end threadM8×1.25 female / M14×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N302 N
0.7 MPa563 N—
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ32X35T

ACQJIS compact (thin) double-acting cylinder series.
32Bore size in mm.
×35Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ32X35T Is Used

straighten

PCB Depaneling Router

Provides the 402.1 N push force necessary to drive the cutting head of a PCB depaneling router, fitting neatly into the tight axial footprint of electronics manufacturing equipment.

package_2

Carton Flap Folder

Actuates folding mechanisms on continuous carton packaging lines, utilizing its 35mm stroke and fixed NBR bumpers to handle repetitive cycling without requiring external cushioning adjustments.

factory

Component Insertion Press

Pushes bearings or bushings into housings on an assembly line, leveraging the 16mm rod and female M8x1.25 thread to maintain rigid alignment during the brief 35mm insertion stroke.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ32X35T the Right Cylinder?

Selecting this model means balancing your force requirements; the ACQ32X35T provides 402.1 N push at 0.5 MPa. If your application demands less force, stepping down to the 25mm bore yields 245.4 N, while stepping up to the 40mm bore increases push capacity to 628.3 N. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centered—the rod will drift, as the fixed bumper only decelerates near the stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe holding.

When requesting a quote, confirm the essential parameters: a 32mm bore, 35mm stroke, NPT1/8 port, female M8x1.25 rod thread, and no built-in magnet. Operating speed spans 30-500 mm/s, and if you need position sensing, look for the -S option to include the magnet for reed or electronic switches.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ32X35T FAQ

The ACQ32X35T generates 402.1 N push and 301.6 N pull at 0.5 MPa, and 562.9 N push at 0.7 MPa, with a maximum push capacity of 82 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.

No, the ACQ32X35T uses fixed NBR elastomer bumpers at both ends rather than an adjustable air cushion. This design is not a lock or brake; for high-speed or high-energy cycles, you should slow the approach speed or install an external shock absorber to prevent end-cap damage.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ32X35T

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ32X35T and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.