
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X40BCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 40mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X40BCBT is a double-acting JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces axial footprint compared to traditional round-body cylinders, making it ideal for machinery where mounting depth is restricted. The unit features a hard-anodized aluminum bore and operates on filtered 40 µm air.
This specific configuration includes a male M14x1.5 threaded piston rod end for direct load coupling, alongside a CB mounting bracket for secure attachment. Instead of an adjustable air cushion, it relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. The body retains magnetic-switch grooves, though this particular SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X40BCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Securing raw aluminum castings onto a CNC machining center tombstone, utilizing the male M14x1.5 thread for a solid fixture interface and 402.1 N of clamping force.
Driving a pop-up sorting arm on a logistics conveyor belt to push medium-weight parcels into chutes, benefiting from the short axial body depth to fit between rollers.
Actuating the sealing head on an automated carton erector to fold and press corrugated flaps, where the fixed NBR bumper absorbs the end-of-stroke impact without requiring adjustment.
When sizing this 32 mm bore actuator, compare its 402.1 N push at 0.5 MPa against the adjacent bores: stepping down to a 25 mm bore yields 245.4 N, while stepping up to a 40 mm bore provides 628.3 N. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centered—the rod will drift, as the fixed bumper only decelerates near the stroke end. For a fail-safe load hold, an external rod lock or pilot-operated check valve is required.
To finalize your order, confirm this exact configuration: 32 mm bore, 40 mm stroke, NPT1/8 port, CB mounting bracket, male M14x1.5 rod thread (B), and no internal magnet.
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. It operates on air at 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and a speed range of 30-500 mm/s.
No, end-of-travel deceleration is handled by a fixed NBR elastomer bumper, not an adjustable air cushion. Additionally, this cylinder does not lock or hold its position if air is lost; the rod will drift. You must use an external shock absorber for high-energy loads and an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.