
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X40BLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 40mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X40BLBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body, saving valuable axial depth where a round-body unit cannot fit. Operating at 0.5 MPa, it generates 402.1 N of push force and 301.6 N of pull force, making it a robust mid-range choice for industrial machinery.
This specific configuration includes an LB mounting bracket for rigid lateral attachment and a male M14x1.5 piston rod end for direct mechanical coupling. The internal bore is hard-anodized, and end-of-travel deceleration relies on a fixed NBR elastomer bumper rather than an adjustable cushion. Although it lacks a sensor magnet, the external body retains standard magnetic-switch grooves for future automation upgrades. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X40BLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extension force to positively eject plastic parts from an injection molding die, utilizing the male M14x1.5 thread for a secure stripper-bolt interface.
Powers a routing flap on a logistics conveyor, where the short JIS compact body saves axial space within the conveyor frame and the LB bracket handles lateral loads.
Actuates a safety interlock on a CNC turning center, taking advantage of the 40mm stroke and fixed NBR bumper to smoothly halt the mechanism without complex adjustments.
When sizing this 32mm bore, stepping down to a 25mm bore yields 245.4 N of push force at 0.5 MPa, while stepping up to a 40mm bore increases that output to 628.3 N. Evaluate your actual load and friction to determine if the 402.1 N capacity is optimal for your cycle. Remember that a plain ACQ body does not hold its position if air pressure drops or the valve is centered; the rod will drift and the fixed bumper only softens the end stop. For fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve. To order this exact unit, confirm the 32mm bore, 40mm stroke, NPT1/8 port, LB bracket, and the male (B) M14x1.5 rod thread.
Quick checklist
At 0.5 MPa, this 32mm bore double-acting cylinder provides 402.1 N of push force and 301.6 N of pull force. At 0.7 MPa, the push force increases to 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and a speed range of 30-500 mm/s.
This model uses an LB mounting bracket for fixed attachment. It decelerates loads using a fixed NBR elastomer bumper at each end, which is not field-adjustable. For high kinetic energy applications, you should slow the approach speed externally or add a shock absorber, as the bumper is not a lock or brake.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.