
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X40BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 40mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X40BT is a double-acting JIS compact cylinder engineered to deliver 402.1 N of push force at 0.5 MPa and 562.9 N at 0.7 MPa. Its short C-clip and riveted piston-to-rod body design drastically reduces overall axial length compared to standard round-body units, saving valuable mounting depth in tight machinery layouts. The bore is hard-anodized for extended pneumatic service life.
This specific configuration features a male-thread piston rod end (M14x1.5) for direct, secure load coupling. Instead of an adjustable air cushion, the ends feature fixed NBR elastomer bumpers to absorb the impact at the stroke limits. The body includes integrated grooves for magnetic switches, though this particular unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X40BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates soft jaw grippers on a CNC lathe turret, utilizing the 40 mm stroke and male M14x1.5 thread for precise, short-travel clamping of bar material.
Drives the mechanical flap-folding arms on a continuous motion case sealer, where the compact body depth prevents interference with adjacent conveyor guides.
Serves as a compact secondary air ejector on an injection molding machine, pushing plastic parts free from the cavity using 402.1 N of extend force.
When sizing this 32 mm bore model, compare its 402.1 N push at 0.5 MPa against the next size down, the 25 mm bore providing 245.4 N, or the next size up, the 40 mm bore yielding 628.3 N. If your application requires holding a load vertically without continuous air pressure, note that a standard ACQ cylinder will drift when the valve is centred; an external rod lock or pilot-operated check valve is required for fail-safe positioning. To order this exact unit, confirm the 32 mm bore, 40 mm stroke, NPT1/8 port, male M14x1.5 rod thread, and no magnet.
Quick checklist
The ACQ32X40BT generates 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ32X40BT uses fixed NBR elastomer bumpers at each end rather than an adjustable air cushion. For high-speed or high-energy loads, you should slow the approach speed or add an external shock absorber to prevent end-cap damage.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.