
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X40SBCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 40mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X40SBCBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted piston-to-rod body, drastically reducing axial footprint compared to round-body alternatives. Operating at 0.5 MPa, it generates 402.1 N of push force and 301.6 N of pull force, utilizing a 16 mm piston rod.
This specific configuration includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches, a male M14x1.5 threaded rod end (-B) for direct load coupling, and a CB mounting bracket. Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not field-adjustable; high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X40SBCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures aluminum workpieces onto a vertical machining center, using the 402.1 N push force to lock the part against hard stops during face milling.
Drives a mechanical arm to tuck minor flaps on a continuous flow case packer, where the 40 mm stroke and male M14x1.5 thread directly connect to the folding blade.
Actuates a sorting pusher on a logistics conveyor, using the CB bracket to mount rigidly to the side frame and the integrated magnet to confirm gate position.
When sizing your application, stepping down to the 25 mm bore yields 245.4 N of push at 0.5 MPa, while stepping up to the 40 mm bore provides 628.3 N. This 32 mm model is an optimal middle ground for moderate force requirements. Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve centers—the rod will drift, as the fixed bumper only decelerates near the stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
To order, confirm your parameters: 32 mm bore, 40 mm stroke, NPT1/8 port, S magnet for sensors, B male M14x1.5 rod thread, and the CB mounting bracket.
Quick checklist
This 32 mm bore cylinder delivers 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa pressure, handles temperatures from -20 to +70 C, and runs at speeds of 30-500 mm/s.
It relies on a fixed NBR elastomer bumper at each end, which absorbs impact but is not an adjustable air cushion or a locking brake. For position feedback, the integrated -S magnet works with AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.