
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X40ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 40mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X40ST is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. It delivers a push force of 402.1 N and a pull force of 301.6 N at 0.5 MPa, utilizing a 32 mm bore and a 40 mm stroke. The riveted piston-to-rod assembly and C-clip retained covers drastically reduce the overall axial footprint compared to traditional round-body units.
This specific configuration includes the -S option, meaning it carries a built-in piston magnet designed for AirTAC position detection. You can mount reed or electronic switches directly into the body grooves. Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not field-adjustable, so high kinetic energy loads require an external shock absorber to prevent end-cap damage. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X40ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 402.1 N extension force needed to plunge a router bit into assembled printed circuit boards, with the short body fitting neatly into dense electronics manufacturing cells.
Drives a 32 mm capping chuck down onto plastic beverage containers, using the magnetic piston to trigger a solid-state switch and verify torque application.
Acts as a hard stop for 40 mm aluminum profiles feeding into a cut-off saw, where the 16 mm rod resists impact and the NBR bumper softens the arrival.
When sizing this 32 mm bore actuator, compare its 402.1 N push force at 0.5 MPa against adjacent options. Stepping down to the 25 mm bore yields 245.4 N, while moving up to the 40 mm bore provides 628.3 N, allowing you to scale thrust precisely to your payload. For this ACQ32X40ST variant, confirm the 40 mm stroke, the NPT1/8 port, the female M8x1.25 rod end, and the integrated magnet for switch readiness.
Keep in mind that a standard compact cylinder will not hold a load if air pressure drops or the directional valve centers. The piston will drift, and the fixed NBR bumper only absorbs impact near the stroke limits without acting as a brake. If your mechanism requires fail-safe positioning, incorporate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ32X40ST uses a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. For high-speed or high-mass loads, you should slow the approach speed or add an external shock absorber to prevent damage.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.