
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X40T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 40mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X40T is a double-acting JIS compact cylinder engineered for tight axial spaces. A riveted piston-to-rod assembly and C-clip locked covers drastically reduce overall length compared to standard round-body units. At 32mm bore, it generates 402.1 N push and 301.6 N pull force at 0.5 MPa.
This specific configuration features a 16mm piston rod with a female M8x1.25 thread end. Deceleration is handled by fixed NBR elastomer bumpers at the stroke limits rather than adjustable pneumatic cushions. The hard-anodized barrel includes integrated sensor grooves, though this particular unit ships without a magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X40T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extend force at 0.5 MPa to secure aluminum housings inside machining centers, fitting neatly into compact tooling plates.
Drives the folding and taping mechanism on automated packaging lines, utilizing the 40mm stroke to clear varying box widths without deep frame clearance.
Actuates routing gates on parcel conveyors, where the short 32mm bore body minimizes interference with passing packages.
When sizing your drive, note the ACQ32X40T delivers 402.1 N push at 0.5 MPa. Stepping down, the 25mm bore yields 245.4 N, while stepping up to the 40mm bore provides 628.3 N. To finalize your order, confirm the 32mm bore, 40mm stroke, NPT1/8 port, female M8x1.25 rod thread, and no magnet. If you require position feedback, specify the S option for an internal magnet.
Remember this cylinder will drift and cannot hold a load if air pressure drops or the valve centers. The fixed NBR bumper only softens the end-stop impact. For fail-safe vertical holding, you must add an external rod lock or a pilot-operated check valve to your setup.
Quick checklist
This double-acting 32mm bore cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The standard stroke limit for this bore is 100mm, and operating speed ranges from 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at both stroke ends to absorb impact. Because these are not adjustable, if your application runs at high speeds or moves heavy masses, you should slow the approach speed or mount an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.