
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X45BCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 45mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X45BCBT is a double-acting JIS compact cylinder engineered for space-constrained machinery. Its short C-clip and riveted body significantly reduce axial mounting depth compared to round-body alternatives. At 0.5 MPa, it generates 402.1 N of push force and 301.6 N of pull force, extending to 562.9 N at 0.7 MPa.
This configuration features a male M14x1.5 piston rod thread for direct load coupling and ships with a CB mounting bracket. The bore is hard-anodized, and deceleration relies on fixed NBR elastomer bumpers rather than adjustable air cushions. While the body includes sensor grooves, this specific SKU omits the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X45BCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Pushes raw bar through the lathe spindle with 402.1 N of force, where the short 45mm stroke retraction fits neatly into the tight machine envelope.
Drives the mechanical arms that tuck top flaps on high-speed packaging lines, using the male M14x1.5 rod end to securely thread into the folding linkage.
Actuates a routing gate to sort parts, using the CB bracket to rigidly mount the cylinder body while the fixed NBR bumper absorbs the 45mm stroke end-stop.
This 32mm bore provides a middle-ground solution. If you need less force, the 25mm bore yields 245.4 N push at 0.5 MPa; stepping up to the 40mm bore provides 628.3 N. Remember that a standard ACQ does not hold its position if air pressure drops or the valve is centered—the rod will drift, and the fixed NBR bumper only decelerates it near the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 32mm bore, 45mm stroke, NPT1/8 port, male M14x1.5 rod thread, CB bracket, and no magnet.
Quick checklist
This 32mm bore double-acting cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, and 562.9 N push at 0.7 MPa. The maximum push force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No. It uses fixed NBR elastomer bumpers at each end to absorb impact, not an adjustable air cushion. Additionally, it does not lock the load when air is lost; the piston will drift. You must add an external shock absorber for high-energy stops or a rod lock for position holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.