
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X45BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 45mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X45BT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted piston-to-rod body. This thin profile significantly reduces axial mounting depth compared to standard round-body units, making it ideal for machinery where space is strictly limited. It delivers a push force of 402.1 N and a pull force of 301.6 N at 0.5 MPa.
This specific configuration includes a male-thread piston rod end (M14x1.5) for direct, secure coupling to your load. The 32 mm bore features a hard-anodized inner wall and a fixed NBR elastomer bumper at each end to absorb end-stop impact. Note that this is a fixed bumper, not an adjustable air cushion; for high-energy cycles, you should slow the approach or add an external shock absorber. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X45BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 402.1 N push force to open and close carton folding jaws on continuous packaging lines, utilizing the 45 mm stroke for rapid, compact actuation.
Drives a short diverter arm on a conveyor belt system to sort small to medium parcels, benefiting from the space-saving JIS compact body profile.
Secures printed circuit board panels during drilling operations, where the male M14x1.5 rod end threads directly into the tooling clamp for secure positioning.
When sizing this 32 mm bore model, consider stepping down to the 25 mm bore (245.4 N push at 0.5 MPa) for lighter duties, or up to the 40 mm bore (628.3 N push at 0.5 MPa) if you need greater thrust. The ACQ32X45BT uses a NPT1/8 port and operates at 30-500 mm/s. To order, confirm the 32 mm bore, 45 mm stroke, male M14x1.5 rod thread, and no magnet. Keep in mind a plain ACQ cylinder will not hold a load if air pressure drops or the valve is centered—the rod drifts, and the fixed bumper only decelerates near the stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
Quick checklist
The ACQ32X45BT generates a push force of 402.1 N and a pull force of 301.6 N at 0.5 MPa. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. It uses a NPT1/8 port and operates at speeds of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb impact, not an adjustable air cushion. Additionally, this specific model ships without a sensor magnet, though the body retains magnetic-switch grooves should you need to swap to an -S variant for reed or electronic switch integration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.