
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X45SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 45mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X45SBT is a double-acting JIS compact cylinder engineered for space-constrained assemblies, utilizing a riveted C-clip body design that drastically reduces axial depth compared to round-body alternatives. It generates 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, driven by a 16 mm piston rod.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male M14x1.5 thread (-B) on the rod end for direct mechanical coupling. Deceleration is handled by fixed NBR elastomer bumpers at the end caps rather than adjustable air cushions, so operators should manage high kinetic energy externally. The NPT1/8 port ensures adequate flow for a 30-500 mm/s operating speed range. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X45SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extension force to secure aluminum castings inside CNC milling fixtures, using the male M14x1.5 thread for a direct threaded jaw coupling.
Drives a 45 mm stroke to tuck minor flaps on continuous-motion case packing lines, where the short C-clip body minimizes frame interference.
Actuates a routing flap to sort packages on a conveyor belt, relying on the integrated magnet to trigger electronic reed sensors for position confirmation.
When sizing this 32 mm bore, stepping down to a 25 mm bore yields 245.4 N of push at 0.5 MPa, while stepping up to a 40 mm bore provides 628.3 N. The ACQ32X45SBT uses a 45 mm stroke, a NPT1/8 port, the male M14x1.5 rod thread, and the sensor magnet. Remember that a standard compact cylinder drifts when air pressure is lost or a valve centers; the fixed NBR bumper only softens the end-of-travel impact. For fail-safe load holding, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force reaches 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa.
No, it uses fixed NBR elastomer bumpers at the stroke ends, which are not field-adjustable. For high-speed impacts, use an external shock absorber. Additionally, it does not hold its load if air pressure drops; the rod will drift unless an external rod lock or pilot-operated check valve is installed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.